正时皮带张紧装置13505-50030 T41078 531066520 VKM71806 For Toyota

1. Timing Belt Tensioner 13505-50030 T41078 531066520 VKM71806 for Toyota

2. Item specifics:

3. Application

4. TNF knowledge

Commonly found in mid- and rear-engine vehicles, a hydraulic clutch linkage is basically a mini hydraulic brake system. A master cylinder is attached to the clutch pedal by an actuator rod, and the slave cylinder is connected to the master cylinder by high-pressure tubing. The slave cylinder is normally attached to a bracket next to the bell housing, so that it can move the clutch release fork directly.

Just like depressing the brake pedal on your car, depressing the clutch pedal pushes a plunger into the bore of the master cylinder. A valve at the end of the master cylinder bore closes the port to the fluid reservoir, and the movement of the plunger forces fluid from the master cylinder through the tubing to the slave cylinder. Since the fluid is under pressure, it causes the piston of the slave cylinder to move its pushrod against the release fork and bearing, thus disengaging the clutch. When the clutch pedal is released, the springs of the pressure plate push the slave cylinder's pushrod back, which forces the hydraulic fluid back into the master cylinder. The biggest plus to a hydraulic linkage is the physics: a small amount of pedal force can be used to manipulate what would normally be a heavy clutch with a shaft and lever linkage.

• 

  Timing Belt Tensioner 026109243A 026109243E 02610924...

• 

  Timing Belt Tensioner VKM71003 13505-74011 for Toyota

• 

  Clutch Release Bearing RCTS338SA1 23265-70C00 For Su...

• 

  Timing Belt Tensioner P157 For Opel

• 

  Tensioner Pulley Ys-249 Ys249 For Ford

• 

  Belt Tensor 55565236 T38344 533008530 VKM35013 13405...

Inquiry